Priority:
Please contact us for turnaround time for large scale projects.
Routine Rush
Today M-D-Y
If this is for a Clinical Trial , select "Clinical Trial Request. "
Biobanking Anatomic Pathology Support Services Clinical Trial Request PCD Billing (PCD Staff Only) Research Request
New Biobanking Protocol Existing Protocol
Our warehouse only maintains tissue slides and blocks for procedures performed at main Penn facilities (HUP, PAH, PPMC). For outside consult cases (accession prefixes: HC, OR, OS, CC, NO), especially those prior to the current year, Penn does not retain tissue material after review. Please contact the originating institution directly to request specimens for cases with these prefixes.
*
All of my cases were done at Penn. I know Penn is still in possession of outside block. I have the outside block in my possession and will send it to TBRC. I have an older outside case and do not have the block.
Clinical Service Needed:
*
Scanning Recuts for Education Special Staining for Teaching IHC for interest New antibody workup for clinical use
Research Service Needed:
*
Standard Request New Project Consultation
For Clinical Trials, please include the full title.
Last name, First name
Pathology and Laboratory Medicine Other Penn Department CHOP I am an external requestor (Academic) I am an external requestor (Commercial)
Collaborating Pathologist:
*
Please write 'None' if you do not have one.
Person to Bill Department:
*
Pathology and Laboratory Medicine Other Penn Department CHOP I am an external requestor (Academic) I am an external requestor (Commercial)
Specify "Person to Bill's" department:
Grant # (e.g. 1 R01 CA 123456-01A1):
NIH NCI DOD Foundation AP Fund Other
Other grant funding type:
Active Fund Number:
Please write "Not available yet" if applicable.
*
Your account will not be charged until the requested service is delivered.
Does your IRB protocol/consent form allow for exhaustion of tissue?
Yes. No. Yes, but do not exhaust the tissue.
Does your protocol allow for exhaustion of tissue?
Yes. No.
Study Protocol or Guidelines for Pathology Materials:
*
Additional document (if needed):
Project Summary/Description:
Please include as much detail as possible. Feel free to upload extra information or details here:
*
Upload for project consultation:
The TBRC Director(s) will review your request and follow up via email about questions or setting up a meeting to further discuss details.
Procedure has not happened yet:
Today M-D-Y
How will we access the sample?
Case will be coming through the clinical lab. We will drop off/courier tissue after procedure.
Please email tbrc@pennmedicine.upenn.edu with any updates or extra details.
If you have more than 10 patients, please submit multiple requests.
Max = 10
Name: DOB: Accession Number and Block ID:
Ex: SH25-12345: A1
Consent Form:
1
Today M-D-Y
Consent Form for Patient 1:
Name: DOB: Accession Number and Block ID:
Ex: SH25-12345: A1
Consent Form:
2
Today M-D-Y
Consent Form for Patient 1:
Name: DOB: Accession Number and Block ID:
Ex: SH25-12345: A1
Consent Form:
3
Today M-D-Y
Consent Form for Patient 1:
Name: DOB: Accession Number and Block ID:
Ex: SH25-12345: A1
Consent Form:
4
Today M-D-Y
Consent Form for Patient 1:
Name: DOB: Accession Number and Block ID:
Ex: SH25-12345: A1
Consent Form:
5
Today M-D-Y
Consent Form for Patient 1:
Name: DOB: Accession Number and Block ID:
Ex: SH25-12345: A1
Consent Form:
6
Today M-D-Y
Consent Form for Patient 1:
Name: DOB: Accession Number and Block ID:
Ex: SH25-12345: A1
Consent Form:
7
Today M-D-Y
Consent Form for Patient 1:
Name: DOB: Accession Number and Block ID:
Ex: SH25-12345: A1
Consent Form:
8
Today M-D-Y
Consent Form for Patient 1:
Name: DOB: Accession Number and Block ID:
Ex: SH25-12345: A1
Consent Form:
9
Today M-D-Y
Consent Form for Patient 1:
Name: DOB: Accession Number and Block ID:
Ex: SH25-12345: A1
Consent Form:
10
Today M-D-Y
Consent Form for Patient 1:
Specimens for recuts:
This is for H&E recuts only.
All recuts are glass coverslipped. Please include accession number, block ID, and quantity (if >1). You can put multiple blocks in one request.
For example:
SH19-123: B1 - 2 recuts SH19-3210: A1, C1 SH19-7891: B1, C1, D1 - 5 recuts
Specimens for Special Stain recuts:
This is not for IHC recuts.
All recuts are glass coverslipped. Please include accession number, block ID, quantity (if >1) and stain. You can put multiple blocks in one request.
For example:
SH19-123: B1 - 2 recuts of trichrome SH19-3210: A1, C1 - Movat SH19-7891: B1, C1, D1 - Jones Silver
Specimens for Interest:
Please include specimen, block ID & antibody.
For example:
SH19-123: A1 = p57, p53 SH19-456: B1 = Ki-67
Description of services provided:
Please note that, in accordance with department policy, clinical paraffin blocks are not available for release for research purposes. Exceptions may be considered only under special circumstances and require prior review and approval by the appropriate departmental leadership. If your studies can be performed on cut sections, please refer to Microtomy section and we will be happy to facilitate the request.
Consultation for initiating a new biobanking protocol Human subject samples available for research Data Help with IRB protocol Letter of support Other (text box for brief free-text description)
Services Required:(i.e. histology, sample distribution, shipping, inventory data, etc.)
Select services needed for this request:
Do you have blocks selected?
Yes, I have blocks selected. No, but I have cases selected. No, I need case and block selection. I am providing slides for staining.
I will provide blocks. I am providing tissue to make FFPE blocks. I will use archived clinical material. Mix - use provided and clinical blocks.
Paraffin FFPE Frozen OCT Mix - FFPE & Frozen
If any blocks are not available how do you want to proceed?
I have alternates selected. Contact me for alternates. Use next best block for alternate or contact me.
Alternate blocks may be necessary for both internal and external specimens if quality or availability issues arise.
I acknowledge.
Blocks from outside institutions may vary in quality and may require re-embedding or facing before use.
I acknowledge
List accession numbers & block IDs:
Hard or decalcified tissues may damage TMA needles and incur replacement costs. Decalcifying reagents may also interfere with downstream assays.
I do not have any specimens with hard tissue. I have hard tissue specimens and I acknowledge.
Please list the hard tissue specimens:
In the case(s) where there is limited material:
Stack cores & OK to exhaust tissue. Stack cores & do NOT exhaust tissue. Contact me if there are issues with blocks.
List how each level is to be used:For example: Level 1: H&E Level 2-7: Unstained slides Level 8-9: IHC Level 10: Spatial Experiment w/ special placement Level 11: H&E
*
Processing & Embedding Re-embedding for research
Specimens and how new blocks should be labeled:
e.g.: SH25-123: A1 - XYZ345
Annotated slides are required for re-embedding:
I am submitting annotated H&E slides. I need H&Es cut and will annotate.
H&E's may no longer represent the surface of the block. New H&Es may be required and will need repeat annotation.
I acknowledge.
Number of specimens to be processed.
Are you submitting cell pellets?
Yes. No.
Cells/cell pellets can be extremely small. Please ensure that there is enough to be visible for embedding and your research.
If your tissue is too big for a single cassette:
Divided up to fit into multiple cassettes. I only want 1 cassette per tissue. Please trim tissue and discard the rest.
Please fill out this form, upload it below and include with your specimens. Ensure you properly fill out special instructions. For example, if you want tissue embedded on edge put "Embed on edge" in special instructions.
Upload Completed Processing Request Form here.
List expected specimens to be received if upload is handwritten:
We prefer that samples be submitted in 70% ethanol (EtOH). If samples are submitted in formalin, they must be delivered Monday-Thursday (not Friday) to avoid weekend delays that could result in over‑fixation.
I acknowledge.
All unstained slides will be labeled with Cassette Label (i.e. accession number) and will be air dried at room temperature unless indicated below.
How many sets of cutting instructions do you have?
Max = 5
Slide Type Number of Slides per block Thickness (uM) Check all that apply:
Case IDs:
If slides need to be de-IDed, enter "Case - deID code".
i.e. SH12-34: A1 = DI5678
Number of blocks: Intended Use:
Number of sections per slide: Sections from same block?
Slide Type Number of Slides per block Thickness (uM) Check all that apply:
Case IDs:
If slides need to be de-IDed, enter "Case - deID code".
i.e. SH12-34: A1 = DI5678
Number of blocks: Intended Use:
Number of sections per slide: Sections from same block?
Slide Type Number of Slides per block Thickness (uM) Check all that apply:
Case IDs:
If slides need to be de-IDed, enter "Case - deID code".
i.e. SH12-34: A1 = DI5678
Number of blocks: Intended Use:
Number of sections per slide: Sections from same block?
Slide Type Number of Slides per block Thickness (uM) Check all that apply:
Case IDs:
If slides need to be de-IDed, enter "Case - deID code".
i.e. SH12-34: A1 = DI5678
Number of blocks: Intended Use:
Number of sections per slide: Sections from same block?
Slide Type Number of Slides per block Thickness (uM) Check all that apply:
Case IDs:
If slides need to be de-IDed, enter "Case - deID code".
i.e. SH12-34: A1 = DI5678
Number of blocks: Intended Use:
Number of sections per slide: Sections from same block?
do you need any of the following
Number of slides per block:
Thickness of sections (in microns/uM):
Standard is 4-5 uM.
Leica (Positively Charged) TOMO (Positively Charged) Superfrost Plus (Positively Charged) Superfrost (No charge) I will provide slides Please order special slides (you will be billed for this)
Slide brand and details (catalog number or name):
Intended use for slides:
This information is needed to know if we need to cut using molecular Protocol (i.e.: fresh blade, clean water bath, wiped down microtome). If you are unsure, please contact your sponsor or select "Genomic Profiling" to be safe.
Staining (IF, IHC, etc.) Genomic Profiling (e.g. next generation sequencing, PCR, etc.)
Upload "intended use for slides":
Please upload the section of the protocol where it states what the unstained slides will be used for. If your protocol doesn't clearly state what the slides could be used for, please contact your sponsor. Attaching a copy of an email in which your sponsor states what the slides will be used for is also acceptable.
We must know if the slides will be used for RNA and/or DNA.
*
Minimum number of slides accepted:
If your block is thin and we cannot get your requested number of slides, we can attempt to get you the minimum in order to not exhaust the patient's material.
Staining (IF, IHC, etc.) Genomic Profiling (e.g. next generation sequencing, PCR, etc.) Phenocycler/CODEX GeoMx Xenium Visium CosMx Other
Specimen ID. Please list specimens to be cut onto slides.
Number of sections to place on each slide
Are all sections from the same block?
Yes No
Room temperature 4C -20C -80C I don't know.
Room temperature 4C -20C -80C I don't know.
Level these instructions apply to:
We will be in touch for details regarding section placement.
Please upload section placement instructions here.
Leica (Positively Charged) TOMO (Positively Charged) Superfrost Plus (Positively Charged) Superfrost (No charge) I will provide slides Please order special slides (you will be billed for this)
Slide brand and details (catalog number or name):
Number of slides per block:
Thickness of sections (in microns/uM):
Standard is 4-5 uM.
do you need any of the following
Specimen ID. Please list specimens to be cut onto slides.
Staining (IF, IHC, etc.) Genomic Profiling (e.g. next generation sequencing, PCR, etc.) Phenocycler/CODEX GeoMx Xenium Visium CosMx Other
Number of sections to place on each slide
Are all sections from the same block?
Yes No
We will be in touch for details regarding section placement.
Leica (Positively Charged) TOMO (Positively Charged) Superfrost Plus (Positively Charged) Superfrost (No charge) I will provide slides Please order special slides (you will be billed for this)
Slide brand and details (catalog number or name):
Number of slides per block:
Thickness of sections (in microns/uM):
Standard is 4-5 uM.
do you need any of the following
Specimen ID. Please list specimens to be cut onto slides.
Staining (IF, IHC, etc.) Genomic Profiling (e.g. next generation sequencing, PCR, etc.) Phenocycler/CODEX GeoMx Xenium Visium CosMx Other
Number of sections to place on each slide
Are all sections from the same block?
Yes No
We will be in touch for details regarding section placement.
Leica (Positively Charged) TOMO (Positively Charged) Superfrost Plus (Positively Charged) Superfrost (No charge) I will provide slides Please order special slides (you will be billed for this)
Slide brand and details (catalog number or name):
Number of slides per block:
Thickness of sections (in microns/uM):
Standard is 4-5 uM.
do you need any of the following
Specimen ID. Please list specimens to be cut onto slides.
Staining (IF, IHC, etc.) Genomic Profiling (e.g. next generation sequencing, PCR, etc.) Phenocycler/CODEX GeoMx Xenium Visium CosMx Other
Number of sections to place on each slide
Are all sections from the same block?
Yes No
We will be in touch for details regarding section placement.
Leica (Positively Charged) TOMO (Positively Charged) Superfrost Plus (Positively Charged) Superfrost (No charge) I will provide slides Please order special slides (you will be billed for this)
Slide brand and details (catalog number or name):
Number of slides per block:
Thickness of sections (in microns/uM):
Standard is 4-5 uM.
do you need any of the following
Specimen ID. Please list specimens to be cut onto slides.
Staining (IF, IHC, etc.) Genomic Profiling (e.g. next generation sequencing, PCR, etc.) Phenocycler/CODEX GeoMx Xenium Visium CosMx Other
Number of sections to place on each slide
Are all sections from the same block?
Yes No
We will be in touch for details regarding section placement.
Thickness of sections (in microns):
Number of sections per tube:
Number of tubes per block:
In the case that the block is thin, what is the minimum amount of tissue in uM needed:
Get rolls before or after unstained slides?
Rolls before slides. Rolls after slides.
All H&Es will be cut at 5uM. Customize thickness in uM:
Film Glass
What would you like stained (per case)?
1 slide, top section 1 slide, bottom section 2 slides, top and bottom sections Other level(s)
Other H&E slide requirement:
If you want specific levels H&E stained, specify.
i.e. (Level #10, 20)
All special stains will be cut at 5uM. Customize thickness in uM:
Film Glass
The following special stains can be performed by TBRC. Batches over 5 slides might require the charging of the cost of reagents needed for the staining.
Use this section to:
List any special stain needed that is not covered above. If your special stains apply to a certain level. What specimens you would like stained if it does not apply to all.
A fresh H&E and pathologist review is required for all punches.
2 mm 3 mm 4 mm 5 mm
Number of punches per block (we will try to meet number):
IMPORTANT INFORMATION:
Please note that, in accordance with department policy, clinical paraffin blocks are generally not available for release for research purposes. Exceptions may be considered only under special circumstances and require prior review and approval by the appropriate departmental leadership. If your studies can be performed on cut sections, please refer to Microtomy section and we will be happy to facilitate the request.
Current approved destinations for block requests:
MPIC ( No block will be released unless the request is accompanied by appropriate patient consent, approved IRB protocol, and ICF. Please upload a PDF or.zip file containing all consent form(s) and documents. All blocks need to be returned within 30 business days. If the blocks are not returned, future block releases to the PI groups or collaborators will be at risk.)
Clinical patient tissue blocks are a limited and irreplaceable resource. Materials released by the Department of Pathology and Laboratory Medicine will be used only for the approved project, maintained in a secure manner, and will not be transferred to another individual or laboratory without prior approval. Tissue exhaustion is not permitted and all reasonable measures must be taken to preserve the block. Any remaining material must be returned to Pathology upon completion of the approved work unless otherwise authorized. Any loss, damage, or unintentional exhaustion of tissue must be reported immediately to Pathology.
*
I acknowledge.
Preferred Block(s) Delivery Date:
Note: Most clinical blocks are not stored on site. They can take up to a week (especially for large requests) to be delivered to PCSC. Please plan accordingly.
Today M-D-Y
Testing to be Performed on Block(s):
Number of Block(s) Requested:
IDs of Block(s) Requested:
Is there any case where there is only 1 block in the case?
Yes No
Cases where there is only 1 block available:
There will be a $25 per month late fee for requests needed past their due date.
I acknowledge.
Blocks can only be released in your study ONLY accepts blocks with very few exceptions. If your study accepts slides, please select "Unstained Slides" above instead. Additionally, every patient must sign a consent form where it explicitly states that their material may be exhausted and not available for future use. If your consent form does not have that language, please have your patient sign the consent for found below:
Block_Exhaustion_Consent.pdf
Number of antibodies requested: All IHC requests are cut at 5uM and placed on the slides the clinical lab currently uses. Add special thickness and/or slide type:
Antibodies Requested: Cases Requested: List:
AB | # Markers | Target Species | Host Species | Ctrl | Level
For example:
Ki67 | One | Mouse | 1
p53 | One | Rat | 2
Things to also include:
Color preference - Red chromogen is recommended for tissues with pigments that are not be easily differentiated from brown chromogen. If an AB needs optimization. If you already have these antibodies. Vendor/Cat. No. Indicate if any cases here need to skip any AB.
For example:
SH23-456: A7 (skip Ki67)
Three slides are run per specimen: RNA + control, Negative RNA control, Gene of interest.
Number of markers per slide:
One Two Multiplex
Dapi Phalloidin
Anti-Mouse Anti-Human Other
Use same slide controls (size permitting). Use batch control.
Each antibody submitted for validation must be submitted separately.
Clinical validation requires at least 10 positive and 10 negative cases. The participation of the requesting pathologist will be crucial to facilitate the process. Please note that this request will not be processed until the pathology accession numbers (10 positive and 10 negative cases) for analytical validation are provided by the requesting pathologist. Please provide the following information as much as you can.
Antibody (AB) Name for Clinically Validation:
*
Company of preferred AB: IVD ABs are preferred. Select "No Preference" if you have no preference.
*
No Preference ABCAM AbNova Agilent ARP Avery Lab. Avery Posey AXXORA BD Bioscience BD Pharmingen BD Transduction Beckman Coulter Bio Legend BioCare BioGenex BioLegend BioRad Biorbyt Bio-SB Boster Bio. Cell Marque Cell Signaling CST Dako Dianova Discovery Antibodies ebioscience Epitomics ERG Invitrogen Leica Life Tech Millipore NewEast Biosciences Novocastra Novus OrigeneTech Protein Tech R&D biosystems RevMab Biosciences Roche/Ventana Santa Cruz Sigma ThermoFisher Ventana Zeta Corp Other
Breast Cytology Dermatopathology Endocrine Gastrointestinal Genitourinary Gynecology Head & Neck Hematopathology Neuropathology Other Soft Tissue & Bone
Will this staining result be used to guide therapy ?
e.g. HER2, PD-L1
*
Yes No
Anticipated number of cases per year:
*
< 20 20-100 >100
Clinical Purpose:
i.e. differential diagnosis #1 vs #2 vs etc.
*
References:
All new validation applications must include a minimum of 2 references. Only a link or an uploaded reference is acceptable. Failure to include a minimum of 2 references might result in a rejection .
*
reference link for AB Validation.
reference link for AB Validation.
Name of target: Species of target: Check all that apply: We require known positive and negative tissues or cell lines. List tissues expected to be positive: List tissues expected to be negative: Do you have positive and negative cell controls?
Mouse Feline Canine Rabbit Rat Other
List Tissues expected to be positive:
List tissues expected to be negative:
Do you have positive and negative cell controls?
Control tissue type for optimization:
Tests for predicting and selecting therapy are not considered ASR1 tests and are subject to FDA regulation (501K premarket approval) and require at least 20 positive and 20 negative cases.
Validation Blocks Attached:
Please make sure your spreadsheet includes accession number and block ID .
Positive Case Validation Blocks:
Include accession number and block ID .
*
Negative Case Validation Blocks:
Include accession number and block ID .
*
Your request will be forwarded to the IHC Director for approval. If you need something else, please contact us by email so we can facilitate: Nicole Hackman .
Are you providing material for macrodissection?
Yes, I am providing slides. Yes, I am providing blocks. No, I want to use archived material.
Number of slides per block:
Thickness of sections in (uM/micron)
Are you providing H&E Guide Slides:
Yes, I am providing the guide slides with "Area of Interest" circled. Yes, I am providing slides but I need the "Area of Interest" circled for an extra charge. No, please cut fresh H&Es and I will have my collaborating pathologist circle. No, please cut fresh H&Es and have "Area of Interest" circled for an extra charge.
Multiple Areas of Interest (AOI):
I have no cases with >1 AOI. Yes, I have >1 AOI circled and I want them in the SAME TUBE. Yes, I have >1 AOI circled and I want them in DIFFERENT TUBES.
Specify AOI Circling Details:
Ensure each AOI is circled with distinct, different colors.
Cases for macrodissection:If more than 1 AOI, please include number of AOIs. i.e. SH12-34: A1 = 2 AOIs
DNA Precautions & Storage:
We do extractions on FFPE sections only.
We will measure DNA concentration with a Qubit.
How are we getting the samples:
I will be dropping off tubes. Please cut rolls.
If you want macrodissection from slides, please check macrodissection above.
If no specific guidance is given, we recommend 3 rolls at 10 um each.
Number of rolls per tube:
Thickness of sections in tube:
Number of tubes per case:
Cases for DNA Extraction:
Extracted DNA storage conditions:
Store at room temperature. Store in 4C Fridge. Store in -20 Freezer. Store in -80 Freezer.
We use an FDA-Cleared Hamamatsu NanoZoomer 360MD scanner.
All slides will be scanned at 40x and de-identified.
Conference Teaching Legal Other
What would you like scanned?
Scan 1 H&E from case. Scan all available H&Es from case(s) Scan all available slides from case(s) Other
Please specify what you would like to be scanned:
Please detail the specific scanning protocol:
Save images to (select all that apply):
Proscia is our default platform for saving images unless specified.
Include project # or name.
Custom array designs are available. Please be sure to include your collaborating pathologist in the "Project Section" above. If you are not collaborating with a pathologist, fees will apply for block selection and slide annotation.
Organ: Control Tissue (to be included within the array): Areas to Core:
Annotation Guidelines:
For annotated H&E slides, circled target regions must be in green ink and cover at least 2× the selected core diameter if possible. Digital images must be .jpg format. New H&E slides may be required if the existing slides do not match the current face of the block. Number of TMA blocks to be constructed:
10 is the maximum in a single request.
If multiple TMA blocks are being constructed and an issue arises with a donor block, may we redistribute donor cores across blocks to proceed with construction while the issue is resolved?
Any area Specific areas - I am providing annotated slides and I acknowledge the guidelines. Specific areas - I am providing digital images and I acknowledge the guidelines. Specific areas - I am providing both annotated slides & digital images and I acknowledge the guidelines.
Adrenal Bladder Brain Breast Colon Heme Lung Normal Oral Cavity Ovary Pancreas Parathyroid Prostate Renal Skin Stomach Various Other
List any control tissue(s) required:
Number of TMA blocks to be constructed:
Max = 10
If multiple TMA blocks are being constructed and an issue arises with a donor block, may we redistribute donor cores across blocks to proceed with construction while the issue is resolved?
Yes No
BLOCK
1
Name:
13 characters max.
Array Size: Map/Layout: A minimum of a 1mm margin within the design area is necessary to accomate tissue expansion during sectioning. Additionally, there must be >0.5 mm space between cores.
Number of donor specimens: Number of cores per donor specimen range:
e.g. Normal = 2-3 cores; Tumor = 3-4 cores
Core diameter: Orientation cores:
Orientation cores are placed to show grid direction.
Phenocycler/CODEX (35mm x 18mm) GeoMx (35.3mm x 14.1mm) Xenium (24mm x 12mm) Visium (6.5mm x 6.5mm) CosMx (20mm x 15mm) Other (please specify dimensions in mm) Not yet known
Yes, I have created a map and they meet the specification stated above. Yes, I have created a map but they do not meet the specifications above. No, I have not created a map.
Number of Donor Specimens:
Number of Cores per donor specimen:
0.6 mm 1.0 mm 1.5 mm 2.0 mm 3.0 mm 5.0 mm Not yet known
Place within array. Place outside array boundary.
BLOCK
2
Name:
13 characters max.
Array Size: Map/Layout: A minimum of a 1mm margin within the design area is necessary to accomate tissue expansion during sectioning. Additionally, there must be >0.5 mm space between cores.
Number of donor specimens: Number of cores per donor specimen range:
e.g. Normal = 2-3 cores; Tumor = 3-4 cores
Core diameter: Orientation cores:
Orientation cores are placed to show grid direction.
Phenocycler/CODEX (35mm x 18mm) GeoMx (35.3mm x 14.1mm) Xenium (24mm x 12mm) Visium (6.5mm x 6.5mm) CosMx (20mm x 15mm) Other (please specify dimensions in mm) Not yet known
Yes, I have created a map and they meet the specification stated above. Yes, I have created a map but they do not meet the specifications above. No, I have not created a map.
Number of Donor Specimens:
Number of Cores per donor specimen:
0.6 mm 1.0 mm 1.5 mm 2.0 mm 3.0 mm 5.0 mm Not yet known
Place within array. Place outside array boundary.
BLOCK
3
Name:
13 characters max.
Array Size: Map/Layout: A minimum of a 1mm margin within the design area is necessary to accomate tissue expansion during sectioning. Additionally, there must be >0.5 mm space between cores.
Number of donor specimens: Number of cores per donor specimen range:
e.g. Normal = 2-3 cores; Tumor = 3-4 cores
Core diameter: Orientation cores:
Orientation cores are placed to show grid direction.
Phenocycler/CODEX (35mm x 18mm) GeoMx (35.3mm x 14.1mm) Xenium (24mm x 12mm) Visium (6.5mm x 6.5mm) CosMx (20mm x 15mm) Other (please specify dimensions in mm) Not yet known
Yes, I have created a map and they meet the specification stated above. Yes, I have created a map but they do not meet the specifications above. No, I have not created a map.
Number of Donor Specimens:
Number of Cores per donor specimen:
0.6 mm 1.0 mm 1.5 mm 2.0 mm 3.0 mm 5.0 mm Not yet known
Place within array. Place outside array boundary.
BLOCK
4
Name:
13 characters max.
Array Size: Map/Layout: A minimum of a 1mm margin within the design area is necessary to accomate tissue expansion during sectioning. Additionally, there must be >0.5 mm space between cores.
Number of donor specimens: Number of cores per donor specimen range:
e.g. Normal = 2-3 cores; Tumor = 3-4 cores
Core diameter: Orientation cores:
Orientation cores are placed to show grid direction.
Phenocycler/CODEX (35mm x 18mm) GeoMx (35.3mm x 14.1mm) Xenium (24mm x 12mm) Visium (6.5mm x 6.5mm) CosMx (20mm x 15mm) Other (please specify dimensions in mm) Not yet known
Yes, I have created a map and they meet the specification stated above. Yes, I have created a map but they do not meet the specifications above. No, I have not created a map.
Number of Donor Specimens:
Number of Cores per donor specimen:
0.6 mm 1.0 mm 1.5 mm 2.0 mm 3.0 mm 5.0 mm Not yet known
Place within array. Place outside array boundary.
BLOCK
5
Name:
13 characters max.
Array Size: Map/Layout: A minimum of a 1mm margin within the design area is necessary to accomate tissue expansion during sectioning. Additionally, there must be >0.5 mm space between cores.
Number of donor specimens: Number of cores per donor specimen range:
e.g. Normal = 2-3 cores; Tumor = 3-4 cores
Core diameter: Orientation cores:
Orientation cores are placed to show grid direction.
Phenocycler/CODEX (35mm x 18mm) GeoMx (35.3mm x 14.1mm) Xenium (24mm x 12mm) Visium (6.5mm x 6.5mm) CosMx (20mm x 15mm) Other (please specify dimensions in mm) Not yet known
Yes, I have created a map and they meet the specification stated above. Yes, I have created a map but they do not meet the specifications above. No, I have not created a map.
Number of Donor Specimens:
Number of Cores per donor specimen:
0.6 mm 1.0 mm 1.5 mm 2.0 mm 3.0 mm 5.0 mm Not yet known
Place within array. Place outside array boundary.
BLOCK
6
Name:
13 characters max.
Array Size: Map/Layout: A minimum of a 1mm margin within the design area is necessary to accomate tissue expansion during sectioning. Additionally, there must be >0.5 mm space between cores.
Number of donor specimens: Number of cores per donor specimen range:
e.g. Normal = 2-3 cores; Tumor = 3-4 cores
Core diameter: Orientation cores:
Orientation cores are placed to show grid direction.
Phenocycler/CODEX (35mm x 18mm) GeoMx (35.3mm x 14.1mm) Xenium (24mm x 12mm) Visium (6.5mm x 6.5mm) CosMx (20mm x 15mm) Other (please specify dimensions in mm) Not yet known
Yes, I have created a map and they meet the specification stated above. Yes, I have created a map but they do not meet the specifications above. No, I have not created a map.
Number of Donor Specimens:
Number of Cores per donor specimen:
0.6 mm 1.0 mm 1.5 mm 2.0 mm 3.0 mm 5.0 mm Not yet known
Place within array. Place outside array boundary.
BLOCK
7
Name:
13 characters max.
Array Size: Map/Layout: A minimum of a 1mm margin within the design area is necessary to accomate tissue expansion during sectioning. Additionally, there must be >0.5 mm space between cores.
Number of donor specimens: Number of cores per donor specimen range:
e.g. Normal = 2-3 cores; Tumor = 3-4 cores
Core diameter: Orientation cores:
Orientation cores are placed to show grid direction.
Phenocycler/CODEX (35mm x 18mm) GeoMx (35.3mm x 14.1mm) Xenium (24mm x 12mm) Visium (6.5mm x 6.5mm) CosMx (20mm x 15mm) Other (please specify dimensions in mm) Not yet known
Yes, I have created a map and they meet the specification stated above. Yes, I have created a map but they do not meet the specifications above. No, I have not created a map.
Number of Donor Specimens:
Number of Cores per donor specimen:
0.6 mm 1.0 mm 1.5 mm 2.0 mm 3.0 mm 5.0 mm Not yet known
Place within array. Place outside array boundary.
BLOCK
8
Name:
13 characters max.
Array Size: Map/Layout: A minimum of a 1mm margin within the design area is necessary to accomate tissue expansion during sectioning. Additionally, there must be >0.5 mm space between cores.
Number of donor specimens: Number of cores per donor specimen range:
e.g. Normal = 2-3 cores; Tumor = 3-4 cores
Core diameter: Orientation cores:
Orientation cores are placed to show grid direction.
Phenocycler/CODEX (35mm x 18mm) GeoMx (35.3mm x 14.1mm) Xenium (24mm x 12mm) Visium (6.5mm x 6.5mm) CosMx (20mm x 15mm) Other (please specify dimensions in mm) Not yet known
Yes, I have created a map and they meet the specification stated above. Yes, I have created a map but they do not meet the specifications above. No, I have not created a map.
Number of Donor Specimens:
Number of Cores per donor specimen:
0.6 mm 1.0 mm 1.5 mm 2.0 mm 3.0 mm 5.0 mm Not yet known
Place within array. Place outside array boundary.
BLOCK
9
Name:
13 characters max.
Array Size: Map/Layout: A minimum of a 1mm margin within the design area is necessary to accomate tissue expansion during sectioning. Additionally, there must be >0.5 mm space between cores.
Number of donor specimens: Number of cores per donor specimen range:
e.g. Normal = 2-3 cores; Tumor = 3-4 cores
Core diameter: Orientation cores:
Orientation cores are placed to show grid direction.
Phenocycler/CODEX (35mm x 18mm) GeoMx (35.3mm x 14.1mm) Xenium (24mm x 12mm) Visium (6.5mm x 6.5mm) CosMx (20mm x 15mm) Other (please specify dimensions in mm) Not yet known
Yes, I have created a map and they meet the specification stated above. Yes, I have created a map but they do not meet the specifications above. No, I have not created a map.
Number of Donor Specimens:
Number of Cores per donor specimen:
0.6 mm 1.0 mm 1.5 mm 2.0 mm 3.0 mm 5.0 mm Not yet known
Place within array. Place outside array boundary.
BLOCK
10
Name:
13 characters max.
Array Size: Map/Layout: A minimum of a 1mm margin within the design area is necessary to accomate tissue expansion during sectioning. Additionally, there must be >0.5 mm space between cores.
Number of donor specimens: Number of cores per donor specimen range:
e.g. Normal = 2-3 cores; Tumor = 3-4 cores
Core diameter: Orientation cores:
Orientation cores are placed to show grid direction.
Phenocycler/CODEX (35mm x 18mm) GeoMx (35.3mm x 14.1mm) Xenium (24mm x 12mm) Visium (6.5mm x 6.5mm) CosMx (20mm x 15mm) Other (please specify dimensions in mm) Not yet known
Yes, I have created a map and they meet the specification stated above. Yes, I have created a map but they do not meet the specifications above. No, I have not created a map.
Number of Donor Specimens:
Number of Cores per donor specimen:
0.6 mm 1.0 mm 1.5 mm 2.0 mm 3.0 mm 5.0 mm Not yet known
Place within array. Place outside array boundary.
Yes. No.
An H&E will be cut and retained by the lab for QC purposes.
Do you need unstained slides?
Yes. No.
Number of sections per block:
Intended use of sections:
Staining (IF, IHC, etc.) Genomic Profiling (e.g. next generation sequencing, PCR, etc.) Phenocycler/CODEX GeoMx Xenium Visium CosMx Other
Intended use of TMA slides:
Please describe the service you require:
3020 Market St. Lab 6 Founders PAH Pathology PPMC Pathology TTAB Lab, Maloney Ground Floor Ship to me Special Courier Other
Please attach a prepaid FedEx or UPS shipping label. We currently do not have the capabilities to generate shipping labels on our end.
For a return address, feel free to use:
Amy Ziober- TDSC
3020 Market St, Suite 250
Philadelphia, PA 19104
*
All research requests must be picked in the lab where the work was completed: 3020 Market St. or Maloney Ground Floor. We will contact the pick up person when the material is ready with the pickup location.
The current charge for courier delivery is $17 each way. A charge of $34 will be added to your bill to account for these fees.
I acknowledge
Delivery Contact:
Share name, email, & phone number for the person who the material will be delivered to.
Write 'Return to File' if applicable.
**ATTN: Process has changed.**
Drop Off Instructions: 1. Print the pdf of this request and include with the slides. The option to print will appear after you click "Submit". 2. Drop off the slides with the printed PDF of this request in the slide scanning bin located in Room FO6.121 (previously the 6 Founders Frozen Section Sign Out Area).
RT______
Please click the "Submit" button to complete your request.
Once submitted, the form will generate two auto-emails: one for the PI stating that he/she will be contacted within 48-72 hours and the second to the TBRC staff with the basic request info populate an auto-email to all TBRC staff.
By submitting this request, you are confirming that all IRB requirements have been met and all proper and necessary consent has been obtained.
Today M-D-Y